CAMSHAFT KIT MORGAN 4/4 1968

Camshaft kit Morgan 4/4 1968-untill today

High torque camshaft. Additional machining required to fit. Increase depth of valve cut-outs in piston crown by .100".
Kit includes: camshaft, followers, valve springs, modified retainers, stem seals & cam lube. Note: all kits are supplied with 711M followers as standard. Please advise if you need pre-711M narrow stem followers supplied.

Power Band: 1000-6500rpm

Valve Lift: 0.420" inlet/0.418" exhaust

Duration: 270°

Timing Figures: 32/58/67/23

Inlet Timing: 103° ATDC

Inlet lift at TDC: 0.095"

Valve Clearances: .016" inlet/.018" exhaust

Valve lifts quoted using a theoretical rocker ratio of 1.52:1. Durations quoted at .016” / .40mm checking height.

Recommended parts to fit with this camshaft:
Adjustable Cam Sprocket (single chain)
Ford Pre-Crossflow OHV Kent
Application:

• Ford Anglia 105E 1.0 1959-1967
• Ford Anglia 123E 1.2 1959-1967
• Ford Cortina Mk1 1.2/1.5 1962-1966
• Ford Cortina Mk2 1.2/1.3/1.5 1966-07/1967
• Ford Consul Classic 1.3/1.5 1961-1963
• Ford Consul Capri 1.3/1.5 1961-1964
• Ford Consul Corsair 1.5 1964-1965
• Ford Prefect 107E 1.0 1959-1961
• Marcos 1500 GT
• Morgan 4/4 1.0/1.3/1.5 1960-1968

Ford Crossflow OHV Kent
Application:

• Ford Capri Mk1 1.3/1.6 1969-1974
• Ford Capri Mk2/Mk3 1.3 1974-1987
• Ford Cortina Mk2 1.3/1.6 07/67-1970
• Ford Cortina Mk3 1.3/1.6 1970-1976
• Ford Cortina Mk4/Mk5 1.3 1976-1982
• Ford Escort Mk1 1.1/1.3/1.6 Mexico 1968-1974
• Ford Escort Mk2 1.1/1.3/1.6 1975-1980
• Ford Fiesta Mk1 1.3 Supersport/1.6 XR2 1980-1983
• Caterham 7
• TVR 1600M 1.6 1972-1977